Discover now the new Cool Breeze
Natural air conditioning for large air volumes
The solution to cool a large volume building during the hot periods of the year is Cool Breeze evaporative cooler.
Today, more than ever, there is particular attention to the quality of the air we breathe in the workplace, Sabiana presents the Cool Breeze evaporative cooler which, in addition to reducing the air temperature, supplies great air changes in large volume buildings, improving the internal micro-climate.
The Polaris Circular Unit Heaters
The Polaris circular unit heaters, for ceiling installation only, are especially suitable for high rooms, even if the optimum ratio between the air flow-rate and the heat output make them suitable for any manufacturing environment.
The large heat exchange coil and the fan downstream of the coil ensure optimum mixing of the air in the environment, meaning less stratification of the hot air than with traditional unit heaters. When supplied with cold water they can also be used in the summer months, thus allowing cooling at very reasonable costs.
The Elegant ECM Sabiana air conditioners
The Elegant ECM Sabiana air conditioners allow, at very economical cost, to heat and cool small and medium size environments, like shops, show rooms, workshops, supermarkets. The range is made up of 12 models:
8 RE-ECM models, for heating only, and 4 PE-ECM models,
for heating and cooling. All models are for ceiling installation and for hot/chilled water supply. The Elegant series uses an innovative brushless synchronous permanent magnet electric motor controlled by an inverter card that is directly installed on the unit. The heat outputs range from 6 to 26 kW and the cooling capacities from 4 to 10 kW.
The Janus Unit Heaters
The Janus unit heaters can be used to economically cool industrial, commercial and sporting facilities, transforming a traditional heating system using unit heaters into a system that can also be used in the summer months, significantly improving the working conditions.
The condensate collection tray is built into the appliance, while two-speed motors are fitted as standard. Upon request, controls with thermostat can also be supplied.
The Comfort Circular Unit Heaters
The Comfort circular unit heaters, for ceiling installation only, are especially suitable for high rooms, even if the optimum ratio between the air flow-rate and the heat output make them suitable for any manufacturing environment.
The large heat exchange coil and the fan downstream of the coil ensure optimum mixing of the air in the environment, meaning less stratification of the hot air than with traditional unit heaters. Four different diffusers ensure perfect control of the air flow, with the possibility on the more common diffusers to tilt each louvre in the desired direction.
The Comfort unit heaters are made in 10 sizes, with heat outputs from 17 to 107 kW, and one or two speeds motors.
